Why you cannot neglect Passive Fire Protection NSW, like Fire Dampers?

 When it comes to fire protection, for most people smoke detectors, spray, and fire extinguishers are the things that come to their mind. But, fire protection is much complex than that. When contemplating on fire safety, people often overlook or completely forget the most fundamental element of fire safety, i.e., to minimize the availability of potential fuel in case of a fire incident; in other words, planning for Passive Fire Protection NSW.

Active and Passive Fire Protection
When it comes to fire protection, there are two dimensions of it. Active Fire protection is the robust system that puts out the fire after a part of the building catches it. Passive Fire Protection will include mitigation of the possibilities of ignition in the structural and functional design of a building or site; and elimination of factors that can turn a fire incident into an inferno. For a holistic Fire Safety and Protection, one needs to integrate both Active and Passive Fire Protection NSW.

Why Passive Fire Protection is important?
Passive fire protection is as important as active fire protection. It attempts to contain fires or slow the spread, such as by fire-resistant walls, floors, and doors. But why is it called Passive Fire Protection? The question comes to mind because the system, contrary to its name, is always in action. Passive Fire Protection NSW will segregate a building (in terms of fire safety) and contain the fire to a region where it can be put out quickly, and save lives and properties.

What are fire dampers?
As a Passive Fire Protection System, fire dampers also divide the building into Fireproof Compartments. Fire dampers NSW are duct fittings that prevent the spread of fire inside the ductwork by shutting the duct opening. It also stops smoke from travelling through the ductwork in a fire event.

How do fire dampers work?
The fusible link, attached to the fire damper, melts when the temperature of a room rises. It alerts the damper to raise the barriers and stop the flow through the duct system. The melting point of the fusible link inside the fire damper is usually 165 degrees Fahrenheit, but if your room needs to be at a higher temperature, considers choosing a fusible link with a higher melting point.

How many types of fire dampers designs are there?
There are two types of dampers designs:
•    Static
•    Dynamic

Static fire dampers NSW are placed in barriers where the HVAC system fan will shut off in the event of a fire. They are installed in horizontal barriers and have a curtain-like design. Since the HVAC system fan will turn off, there will be no air pressure, and the door of the damper will fall due to gravity.

Dynamic fire dampers NSW are located where the HVAC system fan will stay on in the event of a fire. They are installed in vertical barriers and have a spring-loaded design. The doors of the damper have a spring-like action when they are forced to shut.

Adequate Passive Fire Protection NSW will ensure that your property, assets, and most importantly, people are safe from potential fire hazards. Passive Fire Safety design means you are also saving time in evacuation and damage control.