There are different ways including Steel Protection Spray NSW through which self-sustaining combustion cycles could be interrupted. Irrespective of the method you use, the aim is to lower the rate of transfer of heat to polymer and thereby remove the supply of fuel.
So in all there are 4 methods which are involved in the process including decomposition, preheating, combustion or propagation and ignition. Preheating comprises of heating of the materials through external source which helps in raising the temperatures of the materials at such a rate that depends on thermal intensity of source of ignition, thermal conductivity of materials, particular heat of materials, material starts degrading.
The gaseous combustion materials are formed, the rate is dependent mainly on the factors like temperature needed for decomposition, intensity of the external heat, rate of decomposition, etc. The concentration of the flammable gas increases subsequently till it reaches the level which permits sustained oxidation in presence of ignition source. The characteristics of the gases and availability of the gas are the most important variables in the process of ignition and the characteristics which are prevalent in the scenario.
After the removal and ignition of the source of ignition, combustion becomes absolutely self-propagating when sufficient amount of heat is developed and it’s radiated to the materials for continuing the process of decomposition. The process of combustion is mainly governed by these types of variables since the rate of generation of heat, the rate of transfer of heat to surface, rate of decomposition and surface area.
So in all there are 4 methods which are involved in the process including decomposition, preheating, combustion or propagation and ignition. Preheating comprises of heating of the materials through external source which helps in raising the temperatures of the materials at such a rate that depends on thermal intensity of source of ignition, thermal conductivity of materials, particular heat of materials, material starts degrading.
The gaseous combustion materials are formed, the rate is dependent mainly on the factors like temperature needed for decomposition, intensity of the external heat, rate of decomposition, etc. The concentration of the flammable gas increases subsequently till it reaches the level which permits sustained oxidation in presence of ignition source. The characteristics of the gases and availability of the gas are the most important variables in the process of ignition and the characteristics which are prevalent in the scenario.
After the removal and ignition of the source of ignition, combustion becomes absolutely self-propagating when sufficient amount of heat is developed and it’s radiated to the materials for continuing the process of decomposition. The process of combustion is mainly governed by these types of variables since the rate of generation of heat, the rate of transfer of heat to surface, rate of decomposition and surface area.
No comments:
Post a Comment