Fire Dampers is a way to provide safety

Fire damper is technology which helps to provide safety to you and give protection to your building.

What are the different methods of fire damper?

There are some primary methods for fire dampers NSW closure in the event of a fire. They are;

•    Electrically actuated fire damper: When a fire is detected, a signal is sent to the damper so that it can energize it. And accordingly it energizes and closes the damper.
•    Thermal actuated fire damper: Fusible link installed horizontally in a floor and ceiling application. It can also install vertically in a wall application. The damper may be installed within a wall and the fire damper drops down to shut off the flow of air. The fusible link helps to hold the damper open. And when you detect the fire, then fusible link melts and allows the damper to close.
•    Pneumatically actuated fire damper: Electric damper depends upon compressed air to activate the dampers. A pneumatic controls use is the most popular one. The pneumatic tubing and piping could easily develop leaks. But the pneumatic control systems were replaced by direct digital controls or electrical.
•    Hydraulic actuated fire damper: It is a reliable solution to the inherent problems in swing check application.
Different kinds of fire dampers:
It is classified according to the following factors;
•    How they are accurate or forced to close.
•    The physical constraints of their installation.
•    The fire rating of the ceiling, floor or wall.

So getting proper safety measures for your place fire dampers are one of the most easiest way.